Cleaning Before Use; Before Plugging In You Must - Veripart VPKK143W Benutzerinformation

Cleaning before use

Wipe the inside of the fridge with a weak solution of bicarbonate of soda
then rinse with warm water using a damp sponge or cloth. Wash the baskets
and shelves in warm soapy water and dry completely before replacing in the
fridge. The external parts of the fridge
can be cleaned with a non-abrasive detergent diluted in warm water.

Before plugging in YOU MUST:

Check that you have a socket which is compatible with the plug supplied with
the fridge. Check BEFORE switching on!
Do not switch on until four hours after moving the fridge.
The coolant fluid needs time to settle. If the appliance is switched off at any
time, wait 30 minutes before switching back on to allow the coolant fluid
to settle.
Before filling your fridge:
Before storing foods in your fridge, turn the fridge on and wait for 24 hours,
to make sure it is working properly and to allow the fridge to fall to the
correct temperature.
Install door handle
45