3.3 Safety conditions for operation
In the event of a problem:
- Release the bar movement control.
- Press the clutch pedal, disengage the power take-off.
Define a safety zone in the area in which under-run bar movements occur.
In urban areas, mark out your operation site using the appropriate warning sign.
4) Maintenance
•
Maintenance operations must be performed by qualified and accredited personnel. The standard practices of each
specialised trade (mechanics, hydraulics, electricity and pneumatics) must be respected.
•
Check the tightening torque of screws after 1000 and 2000 km of road use, re-tighten to the specified torque, if
necessary (see table 1).
•
As part of routine servicing of the vehicle, periodically check the tightening torque of mounting screws.
6 grease fittings
3 grease fittings per arm
20/84