Hydraulic Version - Pommier 5442 Bedienungsanleitung

• Hydraulic Version

- Prior to any use, check the general condition of your equipment (no leaks, no deterioration of or damage to hoses),
never start up a suspect or faulty machine.
- Prior to and when moving the bar, the operator must ensure that there are no personnel in the area in which bar
movements occur and that there are no objects preventing the bar from moving.
- Starting up:
. All commands are performed with the vehicle in neutral and stationary.
. To operate the bar, start up the hydraulic pump and follow the instructions provided by the installer.
Activate the bar extension command ('road' position) until the bar reaches the position. Make sure that the red and
orange indicator lights go off.
An intermittent audible signal sounds in the bar's movement zone when the controls are activated if the option has
been installed .
IMPORTANT
If you need to leave your position, disengage the power grip (stop the pump) in order to prevent the risk of operation
by a third party and any risk of an accident.
19/84