Hydraulic Version; Repositioning The Bar For Driving; Manual Version - Pommier 5442 Bedienungsanleitung

• Hydraulic Version

- Prior to any use, check the general condition of your equipment (no leaks, no deterioration of or damage to hoses),
never start up a suspect or faulty machine.
- Prior to and when moving the bar, the operator must ensure that there are no personnel in the area in which bar
movements occur and that there are no objects preventing the bar from moving.
- Hydraulic controls must be used for the under-run bar only: these components are designed and intended to control
the under-run bar only.
- Starting up:
. All commands are performed with the vehicle in neutral and stationary.
. To operate the bar, start up the hydraulic pump and follow the instructions provided by the installer.
Activate the bar folding control (site position), until the bar is in position, ensure that the orange indicator light is on
(with the red indicator light also being on).
An intermittent audible signal sounds in the bar's movement zone when the control is activated if the option has
been installed.
If you need to leave your position, disengage the power grip (stop the pump) in order to prevent the risk of operation
by a third party and any risk of an accident.

3.2 Repositioning the bar for driving

• Manual version

Release the catches by lifting the handles on the two plates
-
Lower the upper arms by pushing the bar until the catches lock.
-
Check that the catches have automatically returned to the closed position (handle perpendicular to the body of the
-
catch).
IMPORTANT
18/84