Important Safety Instructions; Operating Your Wine Cooler - MQuvee WineExpert Bedienungsanleitung

1.6 IMPORTANT SAFETY INSTRUCTIONS

Basic precautions when using:
• Only use your wine cooler for intended purposes, as described in this
guide.
• Never unplug the wine cooler by pulling out the power cord, grip the
plug firmly and pull straight out to remove from wall socket.
• Immediately repair or replace any worn or damaged cord, never use
a cord that is split or which shows signs of wear along its length or on
its ends.
• Children should be supervised to ensure that they do not play with
the appliance. Do not allow children to climb on, sit on or stand on
the wine cooler, nor hang from its shelves. They could damage the
cabinet.
• Do not use an extension cord. Do not operate this device if its
power cable or plug is damaged, or it does not work properly, or it
is damaged, or hasn't work properly, or it is damaged, or has been
dropped. If the power cable is damaged, it will need to be replaced
by the manufacturer or his service agency or a similar qualified
person, to avoid any dangers.
• Do not place other appliance inside the cabinet.
6

2. OPERATING YOUR WINE COOLER

1. Removing the Shelf
Once wood shelf need to change, please check which kind of slider
To remove a rolling shelf:
1. Remove all bottles.
2. Pull the shelf out as far as it will go.
3. If design A, lift the shelf up and off the slides. Please make sure
the wood hole need to match with slider hook when you assemble
the shelf.
If design B, a) unscrew the wood shelf from slider b) take out the old
wood shelf and change new one c) Screw the wood shelf again from
shelf bottom as previous.
If design C, which without slider, please close the limit and take out
the shelf.
7