Product Description And Specifications - Bosch EasyDrill 1200 Originalbetriebsanleitung

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The
EasyImpact is also designed for impact drilling in brick, ma-
sonry and stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Technical Data
Cordless drill/driver
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
A)
Impact rate
Max. torque, hard/soft screwdriving application according to
A)
ISO 5393
Chuck capacity
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation
storage
Recommended rechargeable batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery PBA 12V 1.5Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/vibration information
EasyDrill 1200
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated. Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1.
h
Drilling in metal:
Bosch Power Tools
(1) Tool holder
(2) Keyless chuck
(3) Torque presetting ring
(4) Operating mode presetting ring (EasyImpact 1200)
(5) Gear selector switch
(6) Rotational direction switch
(7) Battery release button
(8) Battery
(9) Handle (insulated gripping surface)
(10) On/off switch
(11) "PowerLight"
(12) Screwdriver bit
(13) Universal bit holder
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
-1
min
-1
min
-1
min
Nm
mm
B)
kg
°C
C)
and during °C
EasyImpact 1200
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 85 dB(A); sound power level
96 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
a)
a)
a)
a)
EasyDrill 1200 EasyImpact 1200
3 603 JD3 0.. 3 603 JD3 1..
12
0–400
0–1500
–
30/18
0.8–10
1.0
0 to +35
–20 to +50
PBA 12V...
GAL 12...
EasyDrill 1200 EasyImpact 1200
1 609 92A 7WD | (20.06.2022)
English | 15
12
0–400
0–1500
0–22500
30/18
0.8–10
1.1
0 to +35
–20 to +50
PBA 12V...
GAL 12...