Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch EasyDrill 1200 Originalbetriebsanleitung

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless chuck
(2) Front sleeve
(3) Rear sleeve
(4) Torque presetting ring
(5) Gear selector switch
(6) Clockwise rotational direction indicator
(7) Anti-clockwise rotational direction indicator
A)
(8) Battery release button
A)
(9) Battery
(10) Rotational direction switch
(11) On/off switch
(12) "PowerLight"
(13) Handle (insulated gripping surface)
A)
(14) Screwdriver bit
A)
(15) Universal bit holder
(16) Securing screw for keyless chuck
B)
(17) Hex key
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B) Commercially available (not included in the scope of deliv-
ery)

Technical Data

Cordless drill/driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque, hard/soft
screwdriving application ac-
A)
cording to ISO 5393
Max. drilling diameter
Bosch Power Tools
Cordless drill/driver
– Steel
– Wood
Max. screw diameter
Chuck capacity
Drill spindle thread
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C

Noise/vibration information

Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is 71 dB(A). Uncertainty K=5 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection
Vibration total values a
determined according to EN 62841-2-1:
Drilling in metal: a
Screwdriving: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
EasyDrill 1200
To estimate vibration and noise emissions accurately, the
3 603 JA2 1..
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
V= 12
This may significantly reduce vibration and noise emissions
over the total working period.
-1
min 0–450
Implement additional safety measures to protect the oper-
-1
min 0–1 650
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
Nm 20/11
and organising workflows correctly.
English | 13
EasyDrill 1200
mm
mm
mm
mm
kg
°C
°C
B)
and
GAL 1110 CV
(triax vector sum) and uncertainty K
h
2 2
< 2.5 m/s , K = 1.5 m/s
h
2 2
< 2.5 m/s , K = 1.5 m/s
h
1 609 92A 4Y7 | (19.06.2019)
6
20
6
0.8–10
3/8"
1.0
0 to +35
-20 to +50
PBA 12V...
AL 11..CV
GAL 12...