Troubleshooting Guide - Kenwood ZJP04 Bedienungsanleitungen

Troubleshooting guide

Problem
Kettle not operating.
Kettle not switching
off automatically after
boiling/Long switch
off time.
Water splashing out
of spout area.
Kettle switching on
and off during use or
switching off before
water boiled.
Kettle stopped
working during
operation.
If none of the above solve the problem see "Service &
Customer Care".
English
Cause
No Power.
Kettle unplugged.
Kettle overfilled.
Lid not closed.
Filter not fitted in
spout area.
Limescale/mineral
build up on element is free from scale.
affecting operation. Refer to "descaling"
Boil dry protection
operated due to
insufficient water in Allow to cool down
the kettle.
7
Solution
Check kettle is plugged
in.
Check kettle is
correctly located to
the powerbase.
Check water level is not
above the Max level.
Check lid is closed
correctly.
Always use the filter and
do not overfill above
the Max level.
Check that the element
section under care and
cleaning.
Switch off and remove
from the powerbase.
before refilling.
When the kettle has
cooled down the
switch will reset itself.
Check the water level
is above the minimum
level.