HOMCOM 824-004 Montageanleitung Seite 12

(FIGURE 3)
1. Place the FAN on a stable flat surface. Plug the cord set into a
220-240V~A.C. electrical outlet.
2. POWER: Turn the FAN on by pressing the 'POWER' button; Turn the
FAN off by pressing the 'POWER' button again.
3. SPEED: You can adjust the fan speed to the desired level: low,
medium, or high by pressing 'SPEED'. The speed setting is displayed on
the LED screen (shown in FIGURE 4).
4. MODE: Pressing the' MODE' button will set the FAN into NORMAL,
NATURAL, and SLEEP mode.
5. TIMER: The fan is equipped with a timer that allows you to set it's
length of operation from 1 hour to 12 hours（834-004/834-005）, and
from 0.5 hour to 7.5hours （834-003）.
6. OSC: Pressing the 'OSC' button will start and stop the oscillation
function.
The symbol is displayed on the LED screen.
7. TEMP: Once the unit plug into the power socket or switch on, the FAN
will show the room temperature, and the 'TEMP' will change to 'TIMER'
when the timer is set.
8. Power save mode: when the 'sleep' mode or the 'timer' is on, the main
display will be off after 30 seconds, and you can press any keys to turn
on the display again.
-12-