INSTRUCTIONS FOR USE
Material
Safe Working Load on the
device
Overall Weight of Complete
Device
Storage Specifications
Storage temperature
Storage Relative humidity range
Operating temperature
Operating Relative humidity
range
Electrical Specifications
Not Applicable.
Software Specifications
Not Applicable.
Compatibility Specifications
The Spine System Prone
Supports are compatible
with:
Note: Consult the corresponding IFU for the products mentioned in the above table.
4.3 Sterilization Instruction:
This device is not intended to be sterilized. Equipment damage may occur.
4.4 Cleaning and Disinfection Instruction:
WARNING:
Do not use bleach or products that contain bleach to clean the device. Injury or
equipment damage can occur.
After each use, clean the device with alcohol-based wipes.
Do not put the device into water. Equipment damage can occur.
Document Number: 80028187
Version: C
Urethane, Garolite, High Density Foam, Low Density
Foam, Fusion III, Lectrolite, ABS Plastic, Vinyl Fabric, Low
Stretch Polyester Strap, Velcro Hook and Loop
600 lbs. (272 kg) patient
< 44 lbs. (20 kg) each
-29° C to +60° C
15% to 85%
This device is intended to be used in a controlled Operating
Room environment.
Not Applicable.
Not Applicable.
OSI and Allen rail tops for spinal surgical tables.
Page 21
Description
Description
Description
Description
Issue Date: 16 MAR 2020
Ref Blank Template: 80025117 Ver. F