Protecting The Environment; Ec Declaration Of Conformity; Technical Data - Stanley FATMAX FMC626 Bersetzt Von Den Originalanweisungen

ENGLISH
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent‑based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov‑
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.

Technical data

Voltage
No‑load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood/masonry
Weight
Charger
Input voltage
Output voltage
Current
Approx. charge time
Battery FMC685L
Voltage
18
V
AC
Capacity
Ah 1.5
Type Li‑Ion
Level of sound pressure according to EN 62841:
Sound pressure (L ) 87.0 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 98.0 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
2
Drilling into metal (a ) <2.5 m/s
h, D
Impact drilling into concrete (a ) 14.9 m/s
h, D
10
(Original instructions)
FMC626
18V
V
DC
0‑350/0‑1500
Min‑1
Nm 47
mm 13
mm
13/35
kg 1.2
905998** 906086**
230 230
V
AC
18 18
V
DC
mA 1000 2000
Mins 80‑240 40‑120
FMC687L FMC684L
18 18
2.0 1.3
Li‑Ion Li‑Ion
2
, uncertainty (K) 1.5 m/s
2
, uncertainty (K) 1.5 m/s
2

EC declaration of conformity

Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑1:2018+A11:2019.
These products also comply with Directive 2014/30/EU, and
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni‑
cal file and makes this declaration on behalf of
/
13
The Supply of Machinery (Safety)
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
EN62841‑1:2015, EN62841‑2‑1:2018+A11:2019.
These products conform to the following UK Regulations:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
Electromagnetic Compatibility Regulations, 2016,
%
MACHINERY DIRECTIVE
FMC626 ‑ Cordless impact drill
2011/65/EU.
Stanley Fat Max.
General Manager, Benelux
Egide Walschaertsstraat 14‑18
2800 Mechelen, Belgium
Declaration of conformity
Regulations 2008
FMC626 ‑ Cordless impact drill
2008/1597 (as amended).
S.I.2016/1091 (as amended).
Patrick Diepenbach
Stanley Fat Max,
30/09/2021