Inhaltsverzeichnis
Werbung
4. INSTRUCTIONS FOR USE
4.1.
Use the equipment for its intended purpose, observing the safety
•
regulations and restrictions resulting from the data on the rating plate
(IP degree, duty cycle, supply voltage, etc.). The unit must not be
opened, as this will void the warranty. In addition, exploding naked
parts may cause personal injury.
•
The manufacturer is not responsible for technical changes to the unit
or material damage resulting from such changes.
In case of malfunction contact the service department.
•
Do not block the ventilation slots of the unit - position the welding
•
machine at a distance of 30 cm from surrounding objects.
Do not hold the welding machine under your arm or close to your
•
body.
The unit must not be installed in rooms with aggressive environment,
•
high dust and near units with high electromagnetic field emission.
4.2.
•
Protect the unit from water and moisture.
The welding machine must not be placed on a heated surface.
•
Store the machine in a dry and clean room.
•
4.3.
4.3.1.
•
The unit should be connected by a qualified person. In addition, a
person with the necessary qualifications should check that the
earthing and electrical installation including protection system
complies with safety regulations and is functioning properly.
Place the unit near the work area.
•
Avoid excessively long wires to connect the unit.
•
•
Single-phase welding machines should be connected to an outlet
equipped with a grounding pin.
•
welding machines supplied from 3-phase mains are delivered without
a plug, you should obtain one yourself and have it installed by a
qualified person.
CAUTION! THE unit MAY ONLY BE OPERATED IN AN INSTALLATION WITH A
FUNCTIONING FUSE.
4.3.2.
GENERAL REMARKS
STORING THE UNIT
CONNECTING THE UNIT
ELECTRICAL CONNECTION
GAS CONNECTION
Werbung
Inhaltsverzeichnis
