Charging And Switching On; Pairing The Watch With A Mobile Phone - ARMODD Squarz 9 Pro Bedienungsanleitung

CZ EN

Charging and Switching On

1. The watch must be fully charged before first use. Use
the charging cable supplied with the watch. Always
charge for at least 2 hours and do not move the watch
while it is being charged.
2. Connect the charging cable to the USB port of your
notebook (it must be plugged in) or conventional
mobile phone adapters (5 V) and attach the magnetic
connectors at the opposite end of the cable to the
charging contacts. While charging, the magnetic
connectors of the charging cable must not come into
contact with the strap or end components. It could
result in the charger short-circuiting or strap being
damaged. Therefore, always charge the watch only
with the strap detached.
3. If the display does not come on on its own, gently
press the side button for at least 3 seconds.

Pairing the watch with a mobile phone

Watch settings, the current time and date and their
proper operation require that the watch be paired with
a mobile phone via the recommended WearPro app.
Do not connect the watch to your mobile phone via
your phone's Bluetooth; always use the app. You can
download the app using the QR code below or look it up
in Google Play or the App Store.
78
Android
1. During installation, we recommend that you allow all
authorisations that you will be requested, including
the running of the app in the background.
2. Depending on your mobile phone model, we also
recommend checking setting authorisations in the
app management in your phone, especially location
tracking.
3. Before pairing, activate Bluetooth (making sure it is
visible for all devices for an unlimited time) and GPS in
your phone. Do not pair the watch using the
Bluetooth menu of the phone.
4. Open the WearPro app. It is recommended that you
create an account.
5. The watch should be as close as possible to the
phone during pairing.
6. By tapping on the "Device" icon on the bottom bar in
the app, you can pair the watch with by scanning the
watch's QR code (see "Quick set-up" - icon i) (Fig. 6)
or manually (Fig. 1).
7. When pairing manually, tap on your device in the
scanned devices shown (Fig. 2).
8. Once the devices have been paired, set the required
watch functions in the app (Fig. 3).
9. To allow for more precise measurements, it is
recommended that you fill in your personal profile
in the app.
CZ EN
iOS
79