Charging And Switching On; Pairing The Watch With A Mobile Phone - ARMODD Wristcandy 3 Bedienungsanleitung

EN CZ

Charging and Switching On

1. The watch must be fully charged before first use. Use
the charging cable supplied with the watch. Always
charge the watch for at least 2 hours and do not move it
while it is being charged.
2. Connect the charging cable to the USB port of your
notebook (it must be plugged in) or conventional
mobile phone adapters (5 V) and attach the magnetic
connectors at the opposite end of the cable to the
charging contacts. While charging, the magnetic
connectors of the charging cable must not come into
contact with the strap or metal components. It could
result in the charger short-circuiting or strap being
damaged. Therefore, always charge the watch only with
the strap detached.
3. If the watch's display does not come on on its own,
gently press the side button for at least 3 seconds.

Pairing the watch with a mobile phone

Watch settings, the current time and date and their proper
operation require that the watch be paired with a mobile
phone via the recommended Glory Fit app. Do not pair the
watch to your mobile phone via your phone's Bluetooth;
always use the app. You can download the app using the
QR code below or look it up in Google Play
or the App Store.
78