Disconnect the USB cable from the computer. Right-click on the printer icon
displayed on the computer and then select Remove Device. Next, connect the USB
cable to the computer and try a test print
➢ Konfigurieren Sie die USB-Verbindung erneut gemäß dem in diesem Handbuch für
den Anschluss von einem Computer beschriebenen Vorgehen
Re-set the USB connection by following the steps in this manual for changing the
connection method to a computer. See the related information in this manual, in the
section Computer connections
Patronen Fehlermeldungen –
▪ Nicht originale Tintenpatrone erkannt:
Non-original ink detected
➢ Die Meldung "Möchten Sie diese Tinte weiterverwenden? "wird angezeigt.
Wählen Sie YES, um fortzufahren
The message "Do you wish to continue using this ink?" will appear. Press YES to
continue
▪ Patrone nicht erkannt
Ink cartridge non recognized
➢ Drücken Sie OK, um fortzufahren und die fehlerhafte Kartusche zu entfernen.
Press OK to proceed and remove the faulty cartridge
➢ Setzen Sie die neue Kartusche ein (ACHTUNG: Entfernen Sie den gelben Streifen).
Insert the new cartridge (ATTENTION: remove the yellow strip!)
Warum wurde diese Fehlermeldung angezeigt?
Why did this message appear?
➢ Wenn die Patrone bereits verwendet wurde, ist sie möglicherweise leer!
If the cartridge has already been used, it could be empty
➢ Wenn die Patrone gerade zum ersten Mal eingesetzt wurde, kann sie beschädigt sein.
Bitte kontaktieren Sie unseren Wartung für weitere Informationen.
If the cartridge has just been inserted for the first time, it may be damaged. Please
contact our Printer Help Desk for more information.
Cartridges related errors
elite
Decojet A4
37