Zipro Hulk RS Bedienungsanleitung Seite 23

EN
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with the
product.
Prepare sufficient space for the assembly operation. It is advisable to assemble the product with
another person because of the weight of some elements.
1. Install the front and rear base
Fix the rear (3) and front base (2)
to the main frame (1) using bolts
M8x90 (4), curved washers (5),
and nuts M8 (6).
ATTENTION! Remove any plastic or
cardboard safety inserts before
assembly.
2. Install the cables and
front column
Connect the connecting
cable (36) to the computer
cable (37).
Next, connect the resistance
adjustment cable (38) to the
other connecting cable (38)
as shown in the picture.
23