Zipro Future X Bedienungsanleitung Seite 26

STORAGE
The bicycle can be folded so that it takes up less storage space.
STEP 1
Remove the safety pin (22) from the upper
opening.
STEP 2
Fold the rear frame (1) and front frame (2) to
align the lower openings for safety pins.
STEP 3
Insert the safety pin (22) into the lower
opening to secure the frames.
ADJUSTMENTS
Resistance adjustment
In order to increase the resistance, turn the resistance knob clockwise. In order to decrease the
resistance, turn the resistance knob counterclockwise.
Saddle height
Loosen the adjustment knob. Set the saddle at the right height and tighten the knob. Make sure the
saddle is secured.
Adjusting pedal straps
Fix the side of the rubber strap with three holes to the internal part of the pedal. Fix the other end
to one of the adjustment opening so that the feet is fixed during training and easy to take out.
Repeat for the other pedal.
HANDLING THE BICYCLE
Hold the handlebar (4) and pull the bicycle towards you
until the wheels of the front stabiliser (59) touch the floor.
Push or pull the device to the desired location and then
carefully lower the stabiliser (2) to the floor.
EN
26