Pentair Fleck 5800-XTRi Bedienungsanleitung Seite 7

3.4. By-passing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
Normal operation
In
3.5. XTRi controller installation requirements
• A 2.4 GHz WiFi connection is needed.
• A stable and sufficient WiFi signal is essential.
4 . Programming
4.1. XTRi & XTR controller
Note:
Press
4.1.1. Touchscreen controller quick start
Note:
If the screen is blank after plugging in the unit, touch the screen to turn the screen on.
Format screen
language
Press the button and use the arrows
displayed language: English, French, German, Italian, Spanish, Dutch or
Portuguese.
units
• Press the button to adjust the system's units of measure (either U.S.
or metric);
hardness units
• press the
measure (grains per gallon, mg/L or ppm, German degrees, French
degrees, or English degrees). Hardness units are adjustable only if metric
units are selected.
Ref. MKT-UG-054 / A - 03.06.2022
Softening System
Out
on any Quick Start screen to reset the screen back to its default settings.
button to adjust the system's hardness units of
In Bypass
Softening System
In
to adjust the system's
User Guide Fleck 5800-XTRi-XTR-SXT-LXT
Out
Format
language
units
hardness units
english
metric
mg/L
7 / 76