Connecting To Communication Equipment; Connecting To A Pc/Mac Using The Usb Cable; Connecting The Devices - Yamaha YVC-331 Benutzerhandbuch

Connecting to Communication Equipment

This chapter describes how to connect to each communication device.
After the connection is established, check that sound is output correctly.

Connecting to a PC/Mac using the USB cable

■ Check the following before the connection procedure
Make sure that you have the supplied USB cable available.
In addition, the PC/Mac connected to the product must meet the following system requirements:
• OS: Windows (*1), macOS (*1)
• USB: USB 2.0 or later
(*1) For the supported versions, refer to the following website:
https://uc.yamaha.com/
Notes
• You cannot connect more than one microphone or speaker including this product to one PC/Mac and use them at the
same time.
• Use the supplied USB cable only. Using a different USB cable may cause the product to malfunction.
• The product must be connected directly to a PC/Mac. Connecting the product via a USB hub may cause the product to
malfunction.
• In rare cases, an audio playback may be interrupted due to PC/Mac usage, such as the workload or limited free space
in memory.

■ Connecting the devices

Connect between the product and a PC/Mac through the supplied USB cable.
Tips
• The product receives power from the PC/Mac through the USB cable (USB bus powered).
• You do not need to install a separate USB driver because the PC/Mac recognizes the product as a standard
USB audio device.
To the USB terminal
YVC-331 User's Manual
13