Lavor FIT 35B Bedienungsanleitung Seite 54

25. Block the handlebar in the horizontal position (Fig.21).
ATTENTION: during this operation, do not rest your foot on the appliance.
26. Rotate the stop lever of the command handlebar (16) in the direction of the arrow (Fig.22).
27. Close the command handlebar, pushing the handle (17) towards the main part of the appliance
(Fig.23).
28. Rotate the stop lever of the command handlebar (16) in the direction of the arrow (Fig.24).
29. Position the appliance with its rear part in contact with the fl oor (Fig.25).
30. Press knob as shown in the fi gure, pull out knob in position (18) (Fig. 26) until the fl oor scrubber
body is released (Fig.26).
ATTENTION: carry out this operation for both the left-hand knob and the right-hand knob.
31. Bring the squeegee coupling to the maintenance position and shift the knob (18) outwards
(Fig.27). Rotate the squeegee coupling towards you (Fig.28).
32. Use a damp cloth to thoroughly clean the vacuum chamber of the squeegee (19) (Fig.29).
54
EN