Lavor FIT 35B Bedienungsanleitung Seite 40

ATTENTION: the room where the batteries are recharged must be adequately ventilated to
prevent the accumulation of gases that leak from batteries.
1 Take the appliance to the dedicated battery recharging area
2. If the appliance is working, turn it off via the main switch (1) (Fig. 1).
3. Block the handlebar in the vertical position.
ATTENTION: during this operation, do not rest your foot on the appliance .
ATTENTION: before connecting the battery charger to the socket, make sure the
characteristics of the mains , supply correspond to those of the battery charger.
4. Connect the power plug (2) to the mains supply.
ATTENTION: make sure the green LED (4) on the battery charger lights up when you enable
the battery charger base circuit (Fig.3). This LED indicates that the charger circuit is correctly
powered
5. Remove the cap (5) covering the battery power socket (Fig.4).
40
EN