Herunterladen Inhalt Inhalt Diese Seite drucken

Answering Machine - switel CD7738 Bedienungsanleitung

Schnurlostelefon
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6 Answering Machine

The answering machine is provided with audio operator guidance. Pay attention to the vocal
instructions and information.
51
Language setting
The voice output of the answering machine is in German and cannot be changed.
Setting the weekday and time
When a message is played back, the date and time of its receipt is also announced.
2 sec s
w or v, s
w or v, s
w or v, s
Playing back the weekday and time
s
Switching the answering machine on/off
Maximum recording time
The answering machine can record up to 60 messages. The maximum recording time is 16 minutes. The
maximum length of a message is 2 minutes. When there is no memory capacity available to record new
messages, no further messages are recorded.
Setting the volume
The playback volume can be set to one of 11 levels.
 or ¦
Delay in taking calls
It is possible to set the delay, after which the answering machine takes the call, to between 2 and 9 rings or
to activate the toll−saver function to enable pre−remote access free of charge. The free pre−remote access
function enables you to determine whether new messages have been recorded without accumulating any
telephone charges.
S
If new messages have been recorded on the answering machine, your call is taken after 2 rings.
S
If no messages have been recorded, the call is taken after 4 rings. So, replace the receiver before the
4th ring. No charges for the call will be made.
Press and hold v
Release v
Further information on remote access, . Page 78
Take a call during recording
It is possible to take a call which is already being answered by the answering machine. Recording of the
message is stopped in this case.
è or 
Select answering mode
The answering machine is provided with two, pre−recorded outgoing messages. After outgoing message 1
(OGM 1) has been played, a message can be recorded. Outgoing message 2 (OGM 2), however, is simply
an announcement after which no message can be left. OGM 1 and OGM 2 can be replaced by your own
outgoing messages. When the memory capacity of the answering machine is full, the system automatically
activates OGM 2.
2 sec S
w
v
52
Activate Setting mode
Set the weekday and confirm
Set the hour and confirm
Set the minute and confirm
The weekday and time set are announced
Switch the answering machine on/off
Set the volume
Activate Setting mode
Select the required setting
Take the call
Activate Setting mode
Activate OGM 1
Activate OGM 2
Answering Machine
77

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis