Autool CT180 Bedienungsanleitung Seite 13

Connecting
The hose line connection of the engine with return hose is shown as in Fig.09.
● Disconnect the connections of fuel supply hoses (C、D) and fuel return hoses (A、B) of the engine
fuel system (wrap the connector with towel when disconnecting the connector). Choose proper connec-
tors and connect them to the B end and C end separately, and then connect the other ends to corre-
sponding return hose and outlet hose of the unit. See Fig.09.
● Connect the disconnected other ends (A、D) with proper hose, or remove the fuel pump fuse, or
disconnect the power cable of engine fuel pump.
1- Injector Cleaner & Tester; 2-Engine; 3- Fuel-return hose from engine; 4- Fuel-inlet hose to engine;
5-Auto filter; 6-Engine fuel supply hose; 7-Engine fuel return hose; 8- Auto fuel pump; 9-Auto tank.
Without return hose connecting:
The hose line connection of the engine without return hose is shown as in Fig.10.
● Disconnect the fuel supply hoses (E, F) of engine fuel system (wrap the connector when discon-
necting the connector), and then choose a proper connector and connect it to the E end. Reconnect the
fuel outlet hose of the unit well and make the fuel return hose hanging. See Fig.10.
● Stop the other end of the disconnected end (F) with a proper stopper, (use when the fuel pump has
the fuel return function only) or remove the fuse of fuel pump or disconnect the power cable of fuel
pump.
1- Injector Cleaner & Tester; 2-Engine; 3-stopper; 4- Fuel-inlet hose to engine; 5-Auto tank;6-Auto filter;
Note:
1)When cleaning, care must be taken as the detergent is inflammable. Prepare for a fire extinguisher.
2)Be sure that all hose lines are well connected and there is no leakage on the hose lines before
performing cleaning.
Fig.09
Fig.10
7- Engine fuel supply hose; 8-Auto fuel pump;
11
EN