Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Before using the fan, make sure that it is on a flat and stable surface.
Damage may occur if the fan is placed on an incline or decline.
2. Set all the switches to the "OFF" position, and then insert the plug
directly into a standard AC socket-outlet. Be sure that the plug fits tightly
into the socket-outlet.
3. Rotate " Rotary knob" on control panel to start the fan.
Rotate " Rotary knob" to 1, that mean the fan working at the low speed
Rotate " Rotary knob" to 2, that mean the fan working at the medium
speed
Rotate " Rotary knob" to 3, that mean the fan working at the high speed
Rotate " Rotary knob" to
speed and oscillating at the same time.
Rotate " Rotary knob" to
speed and oscillating at the same time.
Rotate " Rotary knob" to
speed and oscillating at the same time.
To stop the fan, just rotate " Rotary knob" to 0
4. This fan can be up and down oscillated by manual. The maximum
adjustable degree is 90°
5. Remove the plug from the socket-outlet to completely shut the fan off.
To safely take care of your fan, please remember to follow these
instructions below:
1. Always remove the plug from the socket-outlet, and allow the fan to stop
completely before cleaning the fan.
Operating Instructions
Cleaning / Maintenance Instructions
, that mean the fan working at the low
, that mean the fan working at the medium
, that mean the fan working at the high
Werbung
