First Energization - Klugmann KO608TCX Bedienungsanleitung

FIRST ENERGIZATION

When the product is turned on for the first time, the oven is disabled. The hour symbol starts
to flash on the display. In order to start using the oven, it is necessary to pass the start screen
by pressing the setting button for 3 seconds. The clock symbol stops flashing when the
opening screen is passed.
Counter Settings
The time setting can only be made when a cooking program is not active. The adjustment bar
is pressed and released until the hour symbol starts flashing.
In the time setting mode, the time can be adjusted by turning the adjustment button to the
right and left. In the clock setting mode, if no setting is made for 10 seconds, the clock setting
mode will be exited. The last position of the hour and minute hands is considered to be the set
time.
Alarm Time Settings
To set the alarm time, press and release the setting button until the alarm symbol starts
flashing.
In the alarm mode, the time can be adjusted by turning the adjustment button left and right.
After the alarm time is set, it is necessary to press the setting button to activate it. If the
adjustment button is not pressed, the alarm set after 10 seconds is canceled and the standby
mode is entered.
The alarm time can be set as a maximum of 3 hours and a minimum of 2 minutes.
If the alarm is set after exiting the alarm time setting, the alarm symbol lights up steadily, if
not installed the alarm symbol does not light up.
The setting button must be pressed for about 2 seconds to cancel the set alarm.
When the set alarm time expires, audible and visual warnings are given.
The alarm sound and visual warning can be canceled by pressing the adjustment button. If
nothing is left, the alarm tone will continue to sound for 1 minute. After 1 minute, the alarm
will be stopped, but the visual warning of the alarm will be continued.
23