Electrical Connection - Klugmann KO608TCX Bedienungsanleitung

Placing and Fixing the Oven
It takes two or more people to place the oven into the cabinet. Make sure that the oven frame aligns
properly with the front section of the furniture. Mains cord must not remain under the oven, be jammed
between the oven and furniture or be bent.
11
Use the screws provided with the product to fix the oven to the furniture. The screws must be passed
through the plastic parts installed on the product's frame to do the installation procedure as shown in
figures for installation under counter or at a high cabinet. Do not tighten the screws too much. Otherwise,
screw holes may get worn out.
After installation, make sure that the oven does not move. If the oven is not installed in accordance with
the instructions, it may tip over during use.

Electrical Connection

Installation place of the product must have suitable electricasl connections. Main voltage must be in
compliance with the values given on the rating plate of the product. Product's connection must comply
with local and national electrical rules. Before starting the installation of the product, cut off the mains
power. Do not connect the product to the mains until installation is complete.
14