Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.4. Save User Fingerprints with Automatic ID Allocation
An automatic, continuous user ID allocation is carried out (1...98).
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read user fingerprint
1 - read fingerprint - repeat reading of fingerprint
(reading can be continued in this manner)
Finish programming
*
5.5. Save User Fingerprints with Manual ID Allocation
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read user fingerprint
1 - user ID (1...98) - # - read fingerprint - repeat reading
of fingerprint (reading can be continued in this manner)
Finish programming
*
5.6. Save User Numerical Code (PIN) with Automatic ID Allocation
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read user
1 - PIN (4 to 6 digits) - # (reading can be continued in this
numerical code (PIN)
manner) (Do not enter a leading zero for the user ID!)
Finish programming
*
5.7. Save User Numerical Code (PIN) with Manual ID Allocation
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read user
1 - user ID (1...987) - # - PIN (4 to 6 digits) - #
numerical code (PIN)
(Do not enter a leading zero for the user ID!)
Finish programming
*
Notes for PIN Allocation
For the sake of increased safety, you can "hide" your PIN in a digit sequence of up
to 10 digits. This needs to have the following form (exemplary PIN: 123434):
xx123434xx or xx123434 x= 0...9
5.8. Save User RFID Cards with Automatic ID Allocation
An automatic, continuous user ID allocation is made (100...987).
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read user fingerprint
1 - read card/enter RFID card number (8/10/17 digits) - #
(reading can be continued in this manner)
Finish programming
*
5.9. Save User RFID Cards with Manual ID Allocation
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read user fingerprint
1 - user ID (100...987) - # - enter RFID card number
(8/10/17 digits) - # (reading can be continued
in this manner)
Finish programming
*
5.10. Save User RFID in the Block
This allows the master to continuously save 987 cards in one run.
This may take up to 2 minutes.
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read card into the block
1 - user ID (100...987) - # - amount of cards to be read –
(card numbers must
enter RFID card number of the first card (8/10/17 digits) - #
be consecutive)
(reading can be continued in this manner)
Finish programming
*
5.11. Use of Master Fingerprint/Master Card in order to Add/Delete Users
Read Master Fingerprint (ID=99)
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Read master fingerprint
1 (99) - # - read fingerprint 3 times
Finish programming
*
Add/Delete Users with Master Fingerprint/Master Card
Function
Operation/Programming
Add user
1. Read master fingerprint/master card
2. Read user fingerprint (3x)/user card/user PIN - #
(repeat step 2 for further users)
3. Read master fingerprint/master card
Delete user
1. Read master fingerprint/master card twice within 5 s
2. Read user fingerprint/user card/user PIN to be deleted
(if required read more users according to step 2)
3. Read master fingerprint/master card
5.12. Entry of Users for the Panic Function (Activation of Panic Alarm)
Notice: User ID=988/989; length of PIN = 4 to 6 digits, with the exception of 8888.
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Add RFID card
1 - (988 or 989) - # - read card/RFID card number
(8/10/17 digits) - #
or
PIN
1 - (988 or 989) - # - PIN - #
Finish programming
*
5.13. Entry of Visitors
Notice: User ID = 990 ... 999; length of PIN = 4 to 6 digits, with the exception of 8888.
There are up to 10 visitor PINs/cards available which can be used for up to 10 accesses (0...9).
As soon as the specified number of accesses is reached, the PIN/card expires.
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Add RFID card
1 - (990 ... 999) - # - (0 ... 9) - # -
read card/RFID card number (8/10/17 digits) - #
or
PIN
1 - (990 ...999) - # - (0 ... 9) - # - PIN - #
Finish programming
*
5.14. Change User PIN
Notice: In this case, you are working outside of the programming mode, users can carry
out the changes themselves. Length of PIN = 4 to 6 digits, with the exception of 8888.
Function
Operation/Programming
Change PIN
1 - (user ID) - # - old PIN - # - new PIN - # - repeat new PIN #
Change PIN in case of
1 - (read RFID card) - # - old PIN - # - new PIN - # -
combined access with
repeat new PIN #
PIN and card
5.15. Adjust Behaviour of Switching Relay
Function
Operation/Programming
Initiate programming
* - master code - # (default master code: 123456)
Adjust active time of relay
3 - (1-99) - #
(pulse mode)
(relay remains tightened for 1 to 99 s = door open,
default setting: 5 s)
or
30 - #
Adjust relay mode (latch)
(permanently sets the relay into one position until the
entry is carried out anew, then the relay permanently
changes into the other position)
This setting is used, for example, if a door is supposed to
be freely accessible for a longer period of time.
Finish programming
*
Werbung
Inhaltsverzeichnis
