Troubleshooting; Daily Check - Gastrodomus EPC-8L Betriebsanleitung

4. The user can choose the temperature through the knob . It takes 10~15 minutes to bring the water to a
boil.
5. When the desired temperature is reached, the yellow indicator turns off, the heating pipe stops working
and the temperature is kept constant. As the temperature drops, the thermocouple will automatically
connect the power supply, the heating tube will operate again and the temperature will rise. This action
will be repeated throughout the food cooking process.
6. After use, rotate the thermocouple counterclockwise to the original position. And turn off the power
supply for safety.
7. The water or soup used to boil the food should be changed regularly. The water pan should also be
cleaned regularly.

4.Troubleshooting:

PROBLEM
Indicator is not lit and
heating tube is not working
Heating indicator on, but the
temperature does not
increase
Temperature control is
normal, but the indicator is
not on
Temperature rises without
control

6.Daily check:

Check the device before and after use every day:
If there is any deformation of the casing ;
If the power cord is worn or broken ;
If the control panel is damaged ;
CAUSE
There is no power supply
Heating tube wire is loose or heating
tube is burnt
Temperature indicator is burnt
Thermostat is broken
SOLUTION
Connect the power cord
properly
Connect the wire with the
heating pipe properly or
change the burnt heating
pipe
Replace the indicator
Replace the thermostat
11