User manual / Bedienungsanleitung
3. Adjustment of the tracking force
Carefully remove the stylus guard from the cartridge by grasping it
with your thumb and forefinger and gently pulling it forward.
The correct tracking force for your MM cartridge can be found in the
technical data in this user manual. Please only use these values, since
if the tracking force is too light (1g or less) the cartridge could jump
out of the record groove and damage the needle.
However, you should never set a tracking force of more than 5g as
this could cause damage to the diamond and thus to the cartridge.
In case that it is not possible to set the optimal tracking force due
the cartridge being too light, you should use a spacer plate, available
from your Clearaudio importer/dealer.
Further valuable information for the correct adjustment of your
cartridge can be found in the respective user manual of the turntable
and/or tonearm manufacturer.
Made in Germany
Page / Seite 9