Clearaudio Concept V2 Bedienungsanleitung Seite 8

User manual / Bedienungsanleitung
We recommend the following order of assembly:
1. Mount the MM cartridge on the tonearm.
2. Connect the tonearm or turntable ground with the
preamplifier ground (before plugging in the electrical
power supply).
3. Plug the tonearm cable into the phono inputs of your
preamplifier.
4. Turn down the volume control to a minimum position
(position 0).
5. Plug the mains power cord into your electrical power
supply.
Our tip for mounting the cartridge:
Choose a bright workplace and good tools, and take your time so
you can concentrate.
Page / Seite 8
© clearaudio electronic GmbH