Important Notes; Intended Use; Symbols Used; Liability And Warranty - Schwamborn BEF 320EX Originalbetriebsanleitung

EN Floor milling machine BEF 320EX / BEF 320VX

1 Important notes

1 Important notes
© Schwamborn Gerätebau GmbH
Schwamborn Gerätebau GmbH reserves all rights.
Any reproduction, use or distribution of this original
operating manual or the translations of the original
operating manual, in whole or in part, is prohibited
without the express written permission of
Schwamborn Baumaschinen GmbH. If the product
described here is altered without the consent of the
manufacturer, then said manufacturer is not responsi­
ble for any damage that may be incurred. Any such
actions will void the warranty.
The BEF 320EX and BEF 320VX machines dif­
fer only in the drive motor, switch box and belt
drive.

1.1 Intended use

The machine may be used only with the accessories
supplied by the manufacturer for face milling of floor
surfaces such as:
— cement
— screed
— natural stone
Any other use of the machine can lead to dangerous
situations and is prohibited!
Risk of damage!
The machine may not be used for milling bitu­
men surfaces (e.g. roads, footpaths)!
Bitumen can adhere to the rotor, the housing
and the suction nozzle.
To ensure correct use of the machine, follow the
instructions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!
Before using the machine, the
operating personnel must carefully
read and understand this operating
manual!
Keep this operating manual close at
hand for easy reference!
Read and observe documents and operating manuals
provided by suppliers (BEF 320VX:
If the machine is on loan to other parties, the
operating manual must be provided with the machine
and its importance must be made clear.
16

1.2 Symbols used

7.
—
!

1.3 Liability and warranty

Liability or warranty in accordance with legal require­
ments is excluded if:
primarily HONDA).
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer's permission. Any
such actions will void the warranty.
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
relevant symbols.
Warning Prohibition
Important text
Precondition for or result of an action
Instruction steps, the sequence of which must
be followed exactly.
List or unstructured sequence
Reference to other text passages
Additional information
— The instructions in the operating manual
have not been observed.
— The machine or its attachments were im­
properly operated.
— The maintenance was carried out inade­
quately or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used,
has been altered or was removed.
— The specified power supply ratings and
surrounding conditions have not been ob­
served.
— Unsuitable tools have been used.
— An unsuitable dust extraction has been
used.
Direction