AXENT .ONE Bedienungsanleitung Seite 7

ADDITIONAL FEATURES
LE VE L 1
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Turn the multifunction knob counterclockwise.
Single «beep»
Two «beeps»
LE VE L 1
For AXENT.ONE Plus only
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Hold down the multifunction knob.
– Turn it clockwise.
Single «beep»
Two «beeps»
Three «beeps»
LE VE L 1
For AXENT.ONE Plus only
As soon as you sit down on the shower toilet, the spray arm is automatically cleaned with fresh
water. This function can be activated and deactivated.
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Hold down the multifunction knob.
– Turn it counterclockwise.
Single «beep»
Two «beeps»
10
All manuals and user guides at all-guides.com
S I G NAL TO N
The signal tone is activated.
The signal tone is deactivated.
The signal tone is activated
S E AT H E ATI N G
The seat heating is activated.
The seat heating is activated. The temperature of the
seat heating can be adjusted using the remote control.
The seat heating works the same way as «energy
saving mode» on page 19.
The seat heating is deactivated
AUTO MATI C S E LF- C LE AN I N G
Automatic self-cleaning function is activated.
Automatic self-cleaning function is activated.
Automatic self-cleaning function is deactivated.
ADDITIONAL FEATURES
LE VE L 1
After a long time of not using the shower toilet, all water bearing parts can be exchanged with
fresh water.
You are in the mode level 1: «Ambient light» flashes slowly.
– Turn multifunction knob clockwise.
You will hear one «beep«. The system purge has started.
The system purge process stops after 90s automatically.
Turn multifunction knob clockwise again to stop the system purge procedure
immediately.
LE VE L 1
In case of a service intervention, you might be obliged to empty the water tank.
You are in the mode level 1: «Ambient light» flashes slowly.
– Pull the multifunction knob.
– Turn it counterclockwise.
The pump empties the water tank. You will hear a «beep» if the process is finished.
LE VE L 1
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Pull the multifunction knob.
– Turn it clockwise.
Single «beep»
Two «beeps»
SYSTE M PU RG E
E M PT YI N G TH E WATE R TAN K
AM B I E NT LI G HT
The ambient light is activated.
The ambient light is activated.
The ambient light is deactivated
11