Maintenance And Cleaning - AXENT .ONE Bedienungsanleitung

MAINTENANCE AND CLEANING

This product has been designed and manufactured with great care and attention to detail. If you follow a few simple cleaning instructions
you will be able to enjoy its comfort, quality and beauty every day.
C LE AN I N G I N STR U CTI O N S S E AT, LI D AN D R E AR COVE R
Use a mild soap solution to clean the seat and please take care
that the seat and hinges are not left damp. Dry off any residual
water or cleaning agent with a soft cloth. Avoid contact of the seat
and hinges with abrasive, corrosive or chlorine-based cleaners, as
C LE AN I N G I N STR U CTI O N S C E R AM I C
Under no circumstances should you use harsh or abrasive
cleaning substances such as abrasive cream cleansers, scouring
powder or drain cleaner on your ceramic surfaces. Also avoid
using steam cleaners and hard, abrasive sponges. Please bear in
mind that hair colouring products can reduce the effectiveness of
AXENT Easy Clean.
C LE AN I N G R ECO M M E N DATI O N
Cleaning interval Cleaning extent
Daily – Wipe water drops dry with a soft, lint-free cloth
Weekly / – Remove the toilet seat and lid and clean them separately
per month – Clean hinges on toilet seat and cover with a moistened cloth (see page 23)
– Thoroughly wipe all surfaces and corners with a damp, lint-free cloth and a mild, liquid cleaning agent
– Check the spray nozzle for signs of scaling (see page 15 / 20)
– To clean the toilet ceramic appliance, apply a mild, liquid bathroom cleaner (pH value 1–4) for 30 min.
Then clean with a toilet brush and rinse with water.
Quaterly – Work out the decalcification program (see page 14 / 21)
For AXENT.ONE only
TO CLEAN THE MULTIFUNCTION KNOB, PLEASE PLEACE THE SPLASH GUARD ON THE TOILET.
22
All manuals and user guides at all-guides.com
these may cause damage or lead to flash rust. Therefore, when
cleaning the bowl, make sure that the seat and cover are kept in
an upright position until all cleaning agent has been flushed away.
If you follow this guidance then you should remain satisfied
with the performance of AXENT Easy Clean for many years.
Recommended cleaners for sanitary ceramic surfaces with
AXENT Easy Clean finish. The use of acidic cleaners with a pH
value between 1 and 4 is highly recommended. Cleaners with
a pH value in the neutral range (5 to 8) are not always suitable.
We strongly advise against using either weak or strong alkaline
cleaners, i.e. substances with pH values from 9 to 12.
MAINTENANCE AND CLEANING
R E M OVI N G / ASS E M B LY TH E TO I LET S E AT AN D LI D
The toilet seat and lid can be removed, cleaned and remounted quickly and
easily when heavily soiled.
R E M OVI N G
Lift up toilet seat and lid.
Remove toilet seat and lid by vertical lifting out of the bracket.
Clean up the toilet seat and lid.
ASS E M B LY
1. Insert the toilet seat vertically from top. The left hinge bolt from the toilet
3
2
2. While pressing in the right hinge bolt on the toilet seat, let the seat unit
1
3. The pressed hinge bolt audibly engages into the bracket.
C LE AN I N G H I N G ES
The hinges and contact areas on the toilet seat and cover must be cleaned
regularly. This ensures the proper function of the shower toilet.
1. Clean up the contact areas on the cover with moistened cloth.
2. Clean up the hinge bolts on toilet seat with a damp cloth.
seat must be slide in first, into the left side of the seat bracket from the
cover.
slide down completely to the bracket.
2
1
23