Wate R Te M Pe R Atu R E - AXENT .ONE Bedienungsanleitung

USE WITH REMOTE CONTROL
The remote control is part of the product content of AXENT.ONE
2 3
8 9
17
18
19
R E M OTE CO NTRO L O N/O FF/C HARG I N G
ON The remote control is powered off initially. Press [ 19 ] Set for 2 sec. to turn on the remote control.
OFF Press [ 19 ] Set and at the same time [ 1 ] User for 2 sec. to turn off the remote control.
Charging When the power is less than 15%, the [ 4 ] AXENT Logo blinks on and off, which means the battery needs to be charged.
Please connect the standard charge cable to the Charge port [ 23 ] on the remote control.
The [ 5 ] Indicator Lights indicates the battery power and all 5 lights are on when remote control is fully charged.
Don't charge remote control in moist condition.
The rechargeable Li-ion battery is built into the remote control and can't be disassembled by users. Please contact the
local dealer or call the service hot line if there is any problem.
Please charge the remote control for at least 12 hours before first use. It should be noted that the remote control is NOT on a magnet-
friendly surface. A surface with ferromagnetic properties, e.g. Iron is also to be avoided as it affects the charging of the battery.
STAN D - BY M O D E R E M OTE CO NTRO L
The remote control enters into the standby mode automatically and all indicator lights turn off when there is no activity for some time.
Press any icon to exit the standby mode.
16
All manuals and user guides at all-guides.com
Plus only.
1
4 5 6 7
10 11 12 13 14 15 16
20
21
22
23
USE WITH REMOTE CONTROL
2 3
8 9
R E AR WAS H
Press [ 2 ] Rear wash after you are seated; the [ 2 ] Rear wash icon starts to blink and starts the function.
The [ 2 ] Rear wash icon lights up and the shower process is started.
Press [ 7 ] Stop to stop the Rear wash.
The Rear wash will stop automatically after continuous usage of 3 minutes.
L ADY WAS H
Press [ 3 ] Lady wash after you are seated; the [ 3 ] Lady wash icon starts to blink and starts the function.
The [ 3 ] Lady wash icon lights up and the shower process is started
Press [ 7 ] Stop to stop the Lady wash.
The Lady wash will stop automatically after continuous usage of 3 minutes.

WATE R TE M PE R ATU R E

During the shower, repeatedly press [ 11 ] Temperature to select the [ 13 ] Water temperature. The water temperature can be reduced
and increased using the buttons [ 15 ] and [ 16 ]. The [ 5 ] Indicator lights show 5 levels for the water temperature. If the indicator lights
are off, the water temperature corresponds to the cold-water temperature.
AI R D RYE R
Press [ 6 ] Dryer after you are seated; [ 6 ] Dryer illuminates and starts the function.
Air dryer icon lights up and the air dryer function is started.
Press [ 7 ] Stop to finish the function.
The stops automatically after 3 minutes.
AI R D RYE R TE M PE R ATU R E
During the drying process, repeatedly press [ 11 ] Temperature to select the [ 12 ] Air dryer temperature. The air dryer temperature can
be reduced and increased using the buttons [ 15 ] and [ 16 ]. The [ 5 ] Indicator lights show 5 levels for the air dryer temperature. If the
indicator lights are off, the air dryer temperature corresponds to the cold air temperature.
S E AT TE M PE R ATU R E
Repeatedly press [ 11 ] Temperature to select the [ 10 ] Seat temperature. The seat temperature can be reduced and increased using
the buttons [ 15 ] and [ 16 ]. The [ 5 ] Indicator lights show 5 levels for the seat temperature. If the indicator lights are off, the seat heating
is switched off.
4 5 6 7
10 11 12 13 14 15 16
17