INSTALLATION
a) Fastening of the mounting
stands on the tube fan hou-
sing.
ATTENTION:
Use only the screws listed in
the drawing!
No further holes drilling in the
housing and no further
screws tightening in the hou-
sing!
b) Fastening the tube fan on the
wall or roof.
Before check the direction:
Remove foreign matter from
the fan area Protection, pro-
tective grid ( accesories)
assembly or block off the fan.
7 MOTOR PROTECTION
Motor protection thermal
contacts:
EC-Tube Fans of the series
RRV-EC have an integrated
motor protection. Additional
controlling of the motor is not
8 OPERATION
Prior to first commissioning
check:
Installation and electrical
installation properly comple-
ted.
Safety devices fitted
=> protective guards.
Assembly residue and for-
eign particles removed from
fan area.
Rotation direction with direc-
tional arrow on the housing
controlling through short (im-
pulsive) switch on.
foreseen. The grid connection
should be done after chapter 11.
Fan must not rub on fixed
housing components.
Continuous protective
conductor connection
present.
Motor operating capacitor
data complies with the spe-
cifications on the type plate.
23