High" Mode; Low" Mode - Olimpia splendid CALDO TRENDY Installations-, Bedienungs- Und Wartungsanweisungen

Make sure the switch is set to "I" (ON) (6); press the ON/OFF key (SW1) or (T1): the
appliance emits a "Beep" and switches on.
Press the ON/OFF key (SW1) or (T1) again to switch off the appliance.
After the appliance has been switched off, the fan will continue to
work for approximately 1 minute to cool down the components, it
will stop automatically.
Set the switch to "0" (ON) (6) to switch off the appliance.
Press the Mode key (SW2) or (T2) until the Led (S1) switches on.
Press the keys (SW3 - SW4) or (T3 - T4) to increase or decrease the desired temper-
ature.
When the room reaches a comfortable temperature, reduce temperature until the ther-
mostat emits a "Click". The heater switches on and off cyclically to maintain the set
temperature.
Temperature is read by a thermostat located in the appliance, in-
stall a thermometer in another part of the room for a more accu-
rate reading.
Press the Mode key (SW2) or (T2) until the Led (S2) switches on.
Press the keys (SW3 - SW4) or (T3 - T4) to increase or decrease the desired temper-
ature.
When the room reaches a comfortable temperature, reduce temperature until the ther-
mostat emits a "Click". The heater switches on and off cyclically to maintain the set
temperature.
Temperature is read by a thermostat located in the appliance, in-
stall a thermometer in another part of the room for a more accu-
rate reading.
EN - 14
9 - FUNCTIONING
9.1 - Switching on

9.2 - "HIGH" mode

9.3 - "LOW" mode