Control Buttons And Display; Remote Control Functions Buttons (Only For Trendy T) - Olimpia splendid CALDO TRENDY Installations-, Bedienungs- Und Wartungsanweisungen

8 - CONTROL BUTTONS AND DISPLAY

The LEDs on the display show the appliance status.
The LEDs meaning is the following:
Y
SW1
• SW1: Running / Stand-by;
• SW2: Working mode selection
HIGH =˃ LOW =˃ ECO =˃
• SW3:
Temperature set increase;
• SW4:
Temperature set decrease;
• SW5:
"TIMER" mode;
• SW6: "SWING" mode;

8.2 - Remote control functions buttons (Only for Trendy T)

A remote control to ease the settings and
the functions of the appliance is supplied.
At each pressure of a button of the remote
control, the appliance emits a "beep" to
report the signal reception.
• T1: Running / Stand-by;
• T2: Working mode selection
HIGH =˃ LOW =˃ ECO =˃
• T3: Temperature set increase;
• T4: Temperature set decrease;
• T5: "TIMER" mode;
• T6: "SWING" mode;
8.1 - Display
SW3 D1
SW4 S1
S5 S3 S2 SW5
ECO
MAX MIN
S6 S4 SW6
• D1: Set temperature/Timer
• S1: "HIGH" LED;
• S2: "LOW" LED;
• S3:
"ECO" LED;
• S4:
"SWING" LED;
• S5:
"ON/OFF" LED;
• S6: "TIMER" mode LED.
Z
T1
T3
T5
CALDO TRENDY - CALDO TRENDY T
SW2
T2
T4
T6
EN - 13