Eco" Mode; Timer" Mode; Swing" Mode - Olimpia splendid CALDO TRENDY Installations-, Bedienungs- Und Wartungsanweisungen

Press the Mode key (SW2) or (T2) until the Led (S3) switches on.
For model "CALDO TRENDY"
The appliance operates and adjusts power between 900W and 1800W automatically to
maintain ambient temperature at 20° C.
For model "CALDO TRENDY T"
The appliance operates and adjusts power between 750W and 1500W automatically to
maintain ambient temperature at 20° C.
This mode can be used to activate a switching on/off timer of the appliance.
To activate the appliance SWITCHING ON timer, work as described below:
a. With the appliance in stand-by mode (with the power plug connected), press key
SW5 or T5 and choose the desired time value
(0h (Timer off) ---> 1h ---> 2h ---> .. 10h ---> 11h ---> 12h --->
b. The desired value flashes on the screen for a few seconds, then the display returns
to stand-by mode. The LED S6 remains steady on.
c. The appliance will switch on automatically when it reaches the previously set time.
To activate the appliance SWITCHING OFF timer, work as described below:
a. With the appliance on (Led S5 active), press key SW5 or T5 and choose the desired
time value
(0h (Timer off) ---> 1h ---> 2h ---> .. 10h ---> 11h ---> 12h --->
b. The desired value flashes on the screen for a few seconds, then the display returns
to show the detected ambient temperature. The LED S6 remains steady on.
c. The appliance will switch off automatically when it reaches the previously set time.
Press key (SW6) or (T6) until the LED (S4) switches on and the appliance body (1)
starts to rotate in alternate direction (fig.7).

9.4 - "ECO" mode

9.5 - "TIMER" mode

.. 0h (Timer off) ---> ..).
.. 0h (Timer off) ---> ..).

9.6 - "SWING" mode

CALDO TRENDY - CALDO TRENDY T
>>>>>
EN - 15