Power Supply - Grundig MGK 9030 Bedienungsanleitung

3 Power supply

3.1 Operating with the
power adapter
Check that the voltage indicated
on the rating plate of the power
adapter corresponds to your local
power supply.
The only way to disconnect the ap-
pliance from the power supply is to
unplug the power adapter.
1. Plug the charging plug into the
appliance socket and the power
adapter into the wall socket.
CAUTION!
A
groove on the charg-
ing plug must match
the notch in the ap-
pliance socket.
– LED battery symbol will
start flashing, when the
batteries are charged. Once
the trimmer is completely
charged, LED battery symbol
will illuminate continually.
C
Charging
hours when the bat-
tery is fully charged
Multi Grooming Kit with Charging Dock / User Manual
2. LED battery symbol will start
flashing when the unit reaches
low battery capacity during
operation.
– When the batteries are
C
The
C
C
time:1.5
discharged: LED
symbol will not display.
Discharge the ap-
pliance
normal use. Then
recharge to full ca-
pacity.
battery capacity will
only be reached af-
ter several charging/
discharging cycles.
The adapter and unit
may become warm
while charging; this
is normal operation.
When the appliance
is fully charged, it
has a cordless op-
erating time of up to
120 minutes.
battery
through
Maximum
39 / EN