Venga VG RVC 3000 BK Bedienungsanleitung Seite 9

Charge the robot
Start cleaning
VG RVC 3000_[IB]-7L_NEW.indd 9 VG RVC 3000_[IB]-7L_NEW.indd 9
Place the robot onto the charging dock,
making sure the charging contact pins on
the charging dock match up with those
underneath the robot.
If successful, you will hear 3 tones and the
robot will start charging with a beathing
orange light.
Press the power button
robot.
Press the power button
automatic cleaning cycle with the one-touch
control. Plug and play - simple as that!
To pause the robot, press the
robot or press the button on the remote

control.
To resume the cleaning cycle, press the same
button again.
To send robot back to the charging dock, press
the button on the robot or on the remote
control.
If you want to simply end the cleaning cycle
and put your robot in standby mode, press and
hold the button until the robot's indicator
light turns off.
ENGLISH
once to wake up the
again to start a fully
button on the
VG RVC 3000 - 9
16/06/22 13:24 16/06/22 13:24
EN