Venga VG RVC 3000 BK Bedienungsanleitung Seite 15

Our recommendations to maximally extend the battery's lifespan:
• When using for the first time, first use the remaining power of the robot, then charge it
for 4-6 hours.
• Avoid overdischarge of the battery.
• If the robot does not have to operate for more than 3 days, we advise to fully charge it and
turn off the main power switch on the bottom.
TROUBLESHOOTING – ERROR TONE
Your Venga! robot will tell you when something is wrong with a two-tone distress sound.
The indicator will also blink or light up in red. Refer to the chart below to resolve the robot's
problem.
For some errors, rebooting the robot may resolve the problem. To reboot the robot, use the
main power switch on the bottom of the robot. You will hear a tone signifying a successful
reboot.
ROBOT BLINKS
AND INDICATES
Solid red
indicator light
Breathing red
indicator light
VG RVC 3000_[IB]-7L_NEW.indd 15 VG RVC 3000_[IB]-7L_NEW.indd 15
LIKELY CAUSE
BEEP
A wheel is stuck.
Once
BEEP A side brush can't
Twice rotate.
BEEP The suction pipe
Three or the filters are
times clogged.
BEEP Four The rolling brush
Times can't rotate.
BEEP
The robot is stuck.
Once
BEEP
The bumper is stuck.
Twice
The cliff sensors are
BEEP dirty. The robot is
Three hanging over a cliff.
times The robot is stuck on
a dark surface.
The robot cannot
BEEP Four return to its charging
Times dock or there is
charging error.
WHAT TO DO
Clean the swivel and driving wheels,
ensure none of them are blocked
and press the power button to restart
the robot.
Clean the side brush and press the
power button to restart the robot.
Remove and empty the dust bin.
Clean the suction pipe. Clean the
filters.
Remove and clean the robot's rolling
brush and caps.
Free the robot and restart the
cleaning.
Check whether the bumper is flexible.
If the robot is hanging over a drop
edge or is placed on a dark surface,
start it in a new location. Otherwise,
wipe its cliff sensors with a dry cloth.
Ensure there are no obstacles in front
of the charging dock.
Wipe the charging contact pins on
both the charging dock and robot
with a clean, dry cloth.
ENGLISH
EN
VG RVC 3000 - 15
16/06/22 13:24 16/06/22 13:24