Newlux WindPure Stand W1250 Metal Bedienungsanleitung Seite 24

• The top section of the post has a small horizontal
slot on one side and a small circular slot on the
other as shown.
* The side with the circular slot is for the small tilt range screw (10) to
screw into. The side with the horizontal slot is for the tilt range knob (2)
to tighten up onto.
• Take the head assembly and position the mating
neck section over the Post End as shown.
• Slide the tilt adjustment bolt (3) all the way
through as shown.
• Screw in the tilt range knob (2) as shown and just
nip up.
| 24
1
1. Horizontal slot
2. Circular slot
2