Dahlert DT-SJ-19 Bedienungsanleitung Seite 21

21
DISASSEMBLING AND WASHING SILICON COMPONENTS
(Packing is a consumable component and replacement is recommended every 6 months ~ 1 year.
You can purchase components through the Customer Center.)
Assembling and Disassembling the Screw Packing
(if it is not assembled properly, the packing may be damaged)
01
Flip over the screw and pull
to remove it as if you are
pinching it.
Assembling and Disassembling the Extraction Packing / Seal Packing
(if it is not assembled properly, juice may leak)
01
Hold the packing and pull it
out smoothly.
Assembling and Disassembling Chamber Juice Cap Packing
(The juice will leak if not assembled properly.)
01
Remove the packing as
though it is pulled inside out.
Assembling and Disassembling Chamber Packing
(The juice will leak if not assembled properly.)
Remove the packing as though
01
it is pulled inside out from one
side.
4DC01742 사용설명서 DT-SJ-19(102-A2) 7개국어_V.00.indd 21
02
After washing, hold the packing
in a way that the thin part of the
packing faces outwards.
02
Insert one of the edges, and
then put it down.
02
After washing, fit one side of
the packing first like a hook.
After washing, fit one side along
02
with the chamber hole like a
hook by checking the top and
bottom sides of the packing.
03
Place the packing on the
bottom of the screw and push
it in so that it will not fall off.
03
Insert the other parts and put
them down firmly.
03
Fit the rest and push it in
around the rim.
Push the rest of the packing in
03
a way that no parts are folded.
2019-08-13 오후 6:28:12