Dahlert DT-SJ-19 Bedienungsanleitung Seite 15

15
02
Make sure the discharge cover (①) of the chamber
is properly fastened with the loop.
1. Close the discharge cover and fasten it with
the loop.
2. If the packing is not properly assembled or
the lever is not properly closed, the lever
may open or, juice may leak during extraction.
05
Match the mark [
the mark [ ] (②) on the chamber when
putting the parts together.
The hopper will not close if the inner parts are
not assembled properly.
4DC01742 사용설명서 DT-SJ-19(102-A2) 7개국어_V.00.indd 15
※ Assembly Guide with Main Body is in p16.
Discharge Cover
Hopper
] (⑤) on the hopper and
03
Place the ice cream strainer in the chamber.
Wiggle the strainer left and right until the
bump on the strainer fits the groove on the
bottom of the chamber (③).
06
Turn the hopper clockwise up to the mark
[ ] on the chamber.
The hopper will not close if the inner parts
are not assembled properly.
Chamber
Ice Cream
Strainer
2019-08-13 오후 6:28:05