Dahlert DT-SJ-19 Bedienungsanleitung Seite 13

13
t Strainer
02
Place the inner strainer fit into the outer
strainer in the chamber.
Match the binding point (⑤) of the inner
strainer and the wings of the outer strainer
(④) when putting the parts together.
05
Turn the hopper clockwise up to the mark
[
The hopper will not close if the inner parts
are not assembled properly.
4DC01742 사용설명서 DT-SJ-19(102-A2) 7개국어_V.00.indd 13
※ Assembly Guide with Main Body is in p16.
Inner Strainer
Hopper
] on the chamber.
03
Place the screw in the assembly in 02.
Make sure the screw packing (⑥) is properly
placed under the screw before putting the
parts together.
Discharge Cover
06
Make sure the discharge cover (①) of the
chamber is properly fastened with the loop.
1. Close the discharge cover and fasten
it with the loop.
2. If the packing is not properly assembled or
the lever is not properly closed, the lever
may open or, juice may leak during
extraction.
Screw
2019-08-13 오후 6:28:04