Check After Assembly - Dahlert DT-SJ-19 Bedienungsanleitung

16
HOW TO ASSEMBLE: CHAMBER SET AND MAIN BODY
01
Fit chamber set to main body.
02
Assemble the chamber set and main body first and then plug the power cord with your dry hand.
03
Place the juice cup (①) and pulp cup (②) when you extract juice.
Place the cup (②) under the pulp outlet when you make ice cream.
Ice cream will come out of the pulp/ice cream outlet.

Check after Assembly!

 Check if you placed the Strainer of your choice
The juice is not extracted smoothly if the strainer does not fit the ingredient.
 Check if the hopper is closed properly. It may cause injury or failure.
 Check if the juice cap is closed.
Keep it closed until you wish to pour out the juice.
 Check if the chamber set is assembled properly.
 Ice cream comes out of the pulp/ice cream outlet.
When making ice cream, remove the extraction packing.
 Make sure the extraction packing / seal packing / discharge cover loop
are assembled properly.
If the discharge cover is not closed properly, or the packing assembly is not
correct, the discharge cover may open, or juice may leak during extraction.
4DC01742 사용설명서 DT-SJ-19(102-A2) 7개국어_V.00.indd 16
②
①
2019-08-13 오후 6:28:06