CGM 2200I Benutzerhandbuch Seite 66

e. Add recommended oil to the upper limit.
f. Fully tighten the dipstick.
g. Properly dispose of any used oil at an approved
waste management facility.
h. Reinstall the oil maintenance cover.
WARNING
The engine is not filled with oil at the factory.
Any operation before it has been properly filled
with the recommended type and amount of oil
may result in engine damage and void your
warranty.
Air filter
a. Remove the appearance cover.
b. Loosen the filter fix clamp and remove the
cover of the air filter.
c. Remove the foam filter element.
d. Wash in liquid detergent and warm water.
e. Squeeze thoroughly dry in a clean cloth.
f. Saturate in clean engine oil.
g. Squeeze in a clean absorbent cloth to remove
all excess oil.
h. Assemble the filter element onto the filter unit
i. Assemble the filter fix clamp.
j. Reinstall the appearance cover.
WARNING
DO NOT run the engine without the air filter, or
serious danger can result.