Generating Set Maintenance; Engine Maintenance Engine Oil - CGM 2200I Benutzerhandbuch

2.

Generating set maintenance

Use a damp cloth to clean exterior surfaces of the
generating set. Use a soft brush to clean the dirt and
oil.
Use an compressed air (25 PSI) to clear dirt and
debris from the generating set.
Inspect all air vents and cooling slots to ensure that
they are clean and unobstructed.
WARNING
DO NOT use water to clean the generating set.
Water can enter the generating set through the
cooling slots and damage the generating set
windings.
WARNING
DO NOT modify the generating set in any way.
DO NOT tamper with the governor.
Generating set supplies correct rated frequency
and voltage when running at factory set.
Tampering with the factory set governor will void
your warranty.
3.

Engine maintenance Engine oil

Only use four-stroke engine oil of SJ, SL or
equivalent level which are in accordance with or
higher than API standard.
Check the API label on oil bottle or other container,
and make sure the "SJ, SL" or equivalent level letter
is in the label.
SAE 10W-30 is recommended for general, all-
temperature use. Other viscosities shown in the
chart may be used when the average temperature in
your area is within the indicated range.
Ambient temperature
Oil capacity (rated):
See parameters
Add oil
a. Place the engine on a level Surface.
b. Remove the dipstick and wipe it clean.