Ohmex RBT 3618 Gebrauchsanleitung Seite 76

EN
If you notice that the motor shows difficulties in the rotation, gradually
add small quantities of liquid or increase the speed motor.
• If you want to add eventual ingredients you must remove the cap (5) from the cover
(4).
• To turn off the appliance move the switch (16) back on "0".
Before removing the cover (4) from the glass (2), or removing the
glass from the motor base (1) always move the switch (16) back
on "0" and wait for the blades to stop.
When removing the glass (2) from the motor base (1), the appliance
stops (the safety switch activates).
• To remove food residues from the glass (2) sides or to reprocess the foods them-
selves ...
.... move the start switch back on "0"
.... wait for the blades to stop
.... use appropriate tools ONLY.
☞
DO NOT use fingers.
Advices
/
• The processing degree depends on the functioning time.
• To obtain an optima outcome proceed by cycles (do not exceed 2 consecutive min-
utes for functioning cycle) and remove, if necessary, food from the glass sides taking
it towards the middle with the help of the spatula.
• To better amalgamate ingredients use the "PULSE" function. The blades will rotate at
maximum speed.
Use the "PULSE" function only for short periods and/or for operations
which need continuous checks during food processing.
72
USE AS BLENDER
SMX 6208