Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Only use the heater when it is upright and
the castors are attached to the base (also
shown on the cover page of this manual).
Installation and use of the SHX oil-free radiator is quick and simple:
ASSEMBLY
1. Take the appliance from the packaging and remove all packaging materials.
2. Check the appliance for possible damage.
3. Attach the feet as follows:
a)
Carefully turn the appliance upside down.
b)
Fit the feet provided to the plates using the lock nuts. Then insert
the U-shaped hooks into the wheel plate and fix this with the wing
nuts.
4. Turn the convector back upright and place it on a stable, level surface where it will not tip over
and that is not heat-sensitive.
5. Wait another 5 minutes or so before connecting the appliance to the power supply.
Please follow the information on installing the appliance
given in the safety information section very carefully.
ATTENTION
Any other position is unsafe.
COMMISSIONING
ATTENTION
130
Werbung
Inhaltsverzeichnis
